Numbers of the guide – how we chose

Heated air mattress – 3 top-rated

What you’ll see in this guide

We’ll look into three groups of products (and choose one recommendation in each):

1. The “classic” heated air mattress – basically a pad with built-in heaters. This one can be used both in homes and for camping.
2. The heated air mattress pad – this is your “old-school” heated pad that can be used on an air mattress. We’ll choose one that stands out as better and we’ll get into how to use it safely and without damaging your airbed.
3. Body-heated pads – a way to heat up an air mattress with no outside source of energy. Not many people know about these, they’re not as fancy but they are a great conservative solution to the cold air mattress problem.

How we choose the heated air mattresses and pads

Within each category, we created a database and, within our budget, sent out a couple dozen heated air mattresses and pads out to our featured testers

These are the people that test products for us (duh…) and they know what to look for.

We started the work on this 6 months ago and you’re looking at the fruits of that research.

The bottom line is this – none of what you see on this page is random. But we’ll talk more about our testing methodology in a few minutes.

That is…if I can keep your attention that long.

First and foremost, this page is about choosing a heated air bed for you that does not break the bank and will be safe in the long run…both for you and your cold air mattress.

What Was Updated for 2025

For 2025, we’ve made a few updates to keep this guide as helpful and up-to-date as possible.

We tested a few more heated air mattresses, adding three new models to the mix. While we’re not ready to recommend them just yet, we’re gathering more data and will keep you posted. We’ve also spoken to more experts about things like using heating pads with air mattresses, and we’re collecting answers to common questions so we can give you clearer advice.

We’ve also fine-tuned our rating system based on what we’ve learned from users and new trends. For example, we’ve made it easier to compare battery life and how long each mattress stays warm, especially when using different heat settings. Plus, we’re diving deeper into how well these mattresses hold up in the heat, which is important if you want something that’ll last.

This is the second update of the year and we have some new methodology and tests in place.

We’ll keep testing and updating as we go, so check back for more!

Mantuole Heated Air Mattress / Sleeping Pad

Main PROs & CONs:

What’s better about it?

I know of heated air mattresses that cost 2-3 times as much without offering any “real” benefits over this Mantuole.

Knowing what to expect

To get good use out of a heated air mattress/pad like Mantuole, you have to know what to expect. It doesn’t come close to power to a heated pad that you plug into a wall and they probably never will.

It’s not made for that.

It runs on a power bank or a phone charger.

If you switch it on and hand-test it, it won’t feel crazy hot…again, it’s designed like that for safety reasons.

What it will do is yield just enough heat to create a mini-climate between a cold air mattress, a reflective pad and your body.

Coleman North bag

Horizon Hound blanket

Sunbeam heated air mattress pad – top picks for home use

Main PROs & CONs:

What’s better about it?

I know of heated air mattresses that cost 2-3 times as much without offering any “real” benefits over this Mantuole.

Knowing what to expect

To get good use out of a heated air mattress/pad like Mantuole, you have to know what to expect. It doesn’t come close to power to a heated pad that you plug into a wall and they probably never will.

It’s not made for that.

It runs on a power bank or a phone charger.

If you switch it on and hand-test it, it won’t feel crazy hot…again, it’s designed like that for safety reasons.

What it will do is yield just enough heat to create a mini-climate between a cold air mattress, a reflective pad and your body.

Alki Twilight Thermal Air mattress Topper – top non-powered pick

Main PROs & CONs:

When is a topper better heated air mattress?

If you’re not camping in Alaska, a topper that traps your body heat and creates a warming cycle to solve the cold air mattress problem might be the way to go.

There are many of these but none beat the Alki’s balance between warmth efficiency and price.

How it works

There’s a metallic layer that reflects (almost) every iota of heat that dissipates from your body and warms the air between your blanket and the air mattress.

In other words, it’s basically an insulator that protects you from the cold air currents swirling around in your airbed (more on that in a minute).

It’s more comfortable and plush than it sounds

Metallic layer does not sound inviting…at all.

In reality, it’s just a thin layer that you’ll never feel.

It just feels like there’s an unidentified heat source.

What changed in this update?

We’ve tested 3 more heated air mattresses with heaters but we still don’t have the data to include them as potential picks.

We’re also collecting some more FAQs and talking to some industry experts on topics like using heating pads on and air mattress – those answers are still in preparation because there is no clear consensus. So, it will be more like a poll with answers than a straight-up answer.

Choosing a heated air mattress

(the complete buyer’s guide)

In the section below we’ll go over some reference information on choosing.

I’m writing it for two groups of people:

1. Those who like to understand the logic, stats and first-hand experiences behind the top picks.
2. Those who do not like any of our recommendations and want to keep on searching.

Methodology – how we rated the air mattress with heaters and extra insulation

Below is a short overview of what we did to get to the top picks.

I’m including it for one reason alone.

To get this point across – there’s an actual process behind the heated-airbed picks – it’s a combination of first-hand use, testing, and statistics.

In other words – it’s based on thrust, authority in the air mattress field and experiences with the products.

Long story short, here’s what we did:

1. We created a database with all heated air mattresses that might deserve your attention.There were 45 products on that list. Few of them were actually heated inflatables in the true sense of the word – the airbed or pads with heaters that are built-in.That’s because there aren’t many of those….at least not good ones. Here are the specific numbers: 5 air mattresses with heaters, 21 toppers (17 powered and 4 thermal insulating).
2. We talked to 3 industry experts outside of our core team.The initial consultation was about creating the categories of data to collect – from the power and battery hours to the R-value when it exists.This step was about creating a unique database to serve as a foundation for rating and comparing the products within and, when possible, across categories.
3. We went out and gathered the data for the database.It’s 14 data points for 26 products, which is a total of 364 bits of data.This includes everything from the basics like size to the more intricate, experience based bits like on-arrival issues.
4. We went back to the experts for a second consult to define the rating criteria.The goal of this step was to define how important a quality factor is. For example, the ability to actually heat the airbed or keep it warm is crucial.The size, air retention, durability, longevity are all important but not primary factors and they’re not universally applicable.

Heat sealing of vinyl and what it means for heated air mattresses

The main problem with making a good heated air mattress is obvious – the influence of high temperatures.

In other words, what the heating and the wiring that is supposed to keep you warm means for the structural integrity of the airbed.

That’s where the process of sealing comes into the equation.

Standard seals that you might see in an average airbeds have a low melting point, and aren’t a great choice for heated airbeds.

To make them more resistant to high temperatures in the long run, a manufacturer would need to use a nonstandard heat sealing machine that operates at higher temperatures – 1200 degrees Fahrenheit and higher.

The other part of the equation – the vinyl itself

Not all materials used in the modern airbed industry are created equal.

That’s especially true if you’ll be using it to make an air mattress with heaters.

To put it simply, the vinyl has a recipe that makes it worse or better suited for temperature resistance.

For example, UV stabilizers that are typically added to air mattress materials for outdoor use (camping, seaside, lilos) heighten the temperatures at which the seams part.

What this means for you

It means that choosing a heated air mattress with some of these additions in the material itself will mean more reliability and higher longevity.

Counterintuitively, some of these materials are actually cheaper than your standard airbed.

Glue used for the air mattress with heaters

Heat sealed bonds have a higher melting points than glue.

Therein lies the problem with creating a one-piece heated air mattress for home use.

You can’t use heat sealing for the connections between the fabric/vinyl and the body of the pump.

As a result, incorporating heaters into the top surface of an air mattress can results in separation and air leaks around the pump.

The area is already notorious for leak incidence percentage and, just as importantly, being pretty much impossible to fix.

Why I’m stressing this

I want to offer an explanation of sorts for the fact that none of our top three picks is a classic design.

So if you found this page while looking for classic airbed home for home use you are in for a disappointment.

They do exist but they’re not good

It’s not so much the fact that I don’t know of any classic airbed with heaters, it’s more about the fact that none of them are good enough to be a thesleepstudies recommendation.

All our tests showed significant incidences of heat related mishaps, either air leaks or all out seam separation.

The better alternative

Pick number two is a topper that does a great job at heating an air mattress.

Moreover…

This kind of heating is localized to the top surface, more so than with airbeds which feature built-in heaters.

That translates to a lesser temperature rise in the air that fills the airbed.

In the long run, this kind of setup (airbeds plus pad) will be more reliable and better value for your money.

Dwell times when sealing a heated air mattress

To put it simply, dwell time describes how long the connection between the two surfaces is maintained.

This is an important one.

It can be the difference between the heated air mattress that gives in after a weekend of camping and one that lasts a lifetime.

In fully automatic machines, the dwell time is controlled through computer and defined in advance.

Based on personal experience and many roundtrips around these factories over the years I can share this – most still rely on human operators.

This means the person using the machine besides how long the sealing will last.

What it means

Without this analysis, it doesn’t mean much because you can’t really know the well times and material types.

None of the brands list them.

It’s certainly understandable but for our purposes today, it’s useful to know.

Out of the 28 airbeds I analyzed for this guide, only seven offered that bit of information when I reached out.

Since it’s a crucial point, it’s only those seven that made it to the final cut (no pun intended).

The final part of the sealing equation – the pressure

The long-term bond between two parts of the heated air mattress (seam) is a result of three factors – temperature, dwell/time and pressure.

I left pressure for last because there are no significant differences in this aspect.

The other reason is the fact that it’s not as important as temperature and dwell time. In most factories, it’s in the 0.35-0.5 Nm2 range.

Power characteristics of a heated air mattress – supply and battery life

If you’re looking for a camping air mattress with heaters the battery life and the power characteristics will be crucial.

To be specific, you’ll want at least 7 to 10 hours of power independency. This allows for a warm cozy night without waking up to a cold air mattress.

We gathered the testing data into one database that shows the battery behavior in different heat modes.

The graphs below show the average battery life in the low medium and high setting. It’s based on your average portable battery pack.

In the case of the Mantuole, the graph shows the times when their battery/power bank is used.

When using a heated air mattress, pay special attention to the power specs – the voltage and amperage. There’s a good chance that it will only work in those ranges.

For the Mantuole – it’s 5V2A.

Finally, the mlost efficient way to heat up an airbed might not be heatters but a blanket like the Zefabak, which is our top outdoor pick in our guide on top warmest blankets for cold weather here.

Resume and takeaways

I feel that a cold air mattress is a bit less of a problem now that this guide exists.

I wasn’t sure what to expect when we set out to create it but we found a few clear winners.

If you’re still unsure about which of these is right for you, click the button below to skip to the top table.

Vinyl thickness is a direct indication of puncture-resistance….one of the few main ones.

Skip to section

*Puncture-proof/resistant percentile explained

This rating indicates where an airbed ranks among all the airbeds we’ve tested and have data on. For example, a rating of 97 means that it’s in the top 3%. Also, we’ve been getting questions about specific sizes (specifically Twin), so here a link to the list of best twin airbeds with built-in pumps

Air mattress that doesn’t leak – is there such a thing in 2025?

An air mattress that doesn’t leak is like a an unicorn. That was true 10 years ago and it’s still true today.

Our goal is to handpick and personally test as many airbeds for resistance to punctures of different origins. We’ve added quite a few testers and new beds to the testing pool and what you’re seing here is fruit of years’ worth of data and tests.

True “proofness” doesn’t really exist….well, kind of…

Here’s what I mean by that

Airbeds that don’t leak do exist but that won’t be the experience of every single person that buys the bed.

For example, even the most leak and puncture-proof ones do have a certain % of beds that will leak air. It’s the nature of the product – it is after all vinyl shaped into a bed.

So, we’re not looking for absolute “leak-proofnesss” – we’re looking for those with lowest % of popped seams and leaking pumps.

Bottom line – it’s more like a Javan Rhinoceros – it does exist but they’re rare, which makes all the work we did for this guide all the more important.

What Was Updated for 2025

For the 2025 update, we’ve made a few key changes to keep this guide as accurate and helpful as possible.

We’ve added new airbeds to our testing pool, focusing on models that claim to be puncture-resistant. Some of the newer options didn’t quite meet the mark, but we’re still collecting data and will update our recommendations as we go. We’ve also made improvements to how we track puncture resistance over time, so you’ll now see more detailed information about how airbeds hold up after 6 months and a year of use.

Additionally, we’ve expanded our coverage on air mattress covers, highlighting the best options that help extend the lifespan of your mattress by preventing punctures and leaks. More than ever, we’re working closely with industry experts and testing teams to refine our criteria and make sure the recommendations are based on the latest, most relevant information.

We’ll continue to gather first-hand user feedback and data, so expect more updates as we test new products and refine our recommendations for the future!

Top-rated puncture-proof air mattress – BeyondHome

Short video from the makers

Summary

OK, so I’m not a fan of that video but we typically introduce it here if it exists – and most of the better brands make these promo videos.

We usually go on to analyze whether the claims make sense.

In this case, we have to dig deeper because the video is just a bunch of people being happy…I guess because they own an air mattress or something…

I dunno…

Anyway, here’s where the rubber meets the road…

What makes it more puncture-proof?

How it compares in other categories?

How it tested – excerpts from our database

Dream Series – puncture-resistant air mattress on a budget

The Dream Series has stayed in the Top 3 lowest percentile of punctures and air leaks for almost a decade now (based on our data in the lower-to-medium price range).

Both of those results are under 0.04%.

Specifically, it’s at 0.036% and 0.038 for punctures and leaks.

What the numbers mean

Simply put, it’s the number of people who see a leak or a puncture and share it.

It can’t be absolutely precise because some people never report it. But that’s also true for other beds.

It’s as low as one puncture for every 2,778 and one a peg higher for leaks – one in 2,631 (0.036 and 0.038%).***

Now, is this a puncture-proof air mattress?

No….not in absolute terms.

As we’ve established, there’s no such thing.

Punctures are an inherent issue of air mattresses – after all, it’s PVC 0.3-0.5 mm filled with air.

It is, however, the most puncture-proof airbed among the classic vinyl models.

The one that we like more uses TPU instead of “regular” vinyl.

In our results, air mattresses that are close to it usually feature extra protection for the top and are raised on a frame/platform.

That all adds to the cost.

The “puncture-proofness” doesn’t always follow.

Some of the beds on this page cost much more than the Dream Series.

Others (that didn’t make it to the top of our list) cost a few times more and have much poorer numbers regarding perforations, cuts, leaks around the pump, or mysterious punctures that can’t be located.

Is it puncture-resistant?

Yes, as much as an vinyl airbed can be.

That’s based on decades-worth of testing and a massive pool of data.

Puncture resistance percentile: 96

Overall rating: 93

Unpoppable air mattress by Enerplex – thicker vinyl, welded seams

Note – we’re still processing the latest update of the puncture resistance stats for Enerplex. It’ been in the top 3 for 8 updates now.

Height-centered rating: 88.3

Overall rating: 82.6

Puncture-proof air mattress cover – our pick, Moonsea Quilted

To make it all simple, the summary above is an extract of our experience and testing data.

In the section below, we get into the nitty-gritty of what makes our picks more puncture-proof, how they take on the challenges of prolonged use and some of the relevant test results.

Below is a detailed but concise guide on choosing a leak-proof and puncture-resistant air mattress.

I have 3 goals here:

1. Offer insight into how we chose the beds we recommend – so that you know none of it is random
2. Explain the science, logic, and data behind the picks
3. Give you the tools to know what to look for if you don’t like any of our picks

(0 to 8.4 points in our ratings)

Polyvinyl chloride (PVC)

Most air mattresses you’ll see are made using PVC.

That’s because PVC is a synthetic plastic polymer that’s durable and light. It’s also cheap to make, which is why 99% of the airbeds made in China are PVC.

It’s also resistant to chemical, puncture, and abrasion damage.

Now, not all PVC is created equal in terms of resistance.

Some types are more puncture-proof:

• Layered vinyl – the more layers, the better.
• Virgin vinyl – slightly more resistant than recycled, deserves mention, but it’s not a big deal.
• Thick vinyl (measured in gauge*) – you usually get 12-gauge with most air mattresses.

*The higher the gauge, the thicker and more durable the vinyl. For example, a 14-gauge vinyl may be more puncture-resistant than a 12-gauge vinyl.

Anyway…

PVC is the perfect material for air mattresses since it is simple to mold and shape into different shapes and sizes.

TPU – more resistant, rarely used because of the cost

Thermoplastic polyurethane (TPU) is another vinyl used for airbeds. It’s the one I like more, but it’s also one that costs more, so it’s rarely used.

Our top pick is made from TPU, which is why it cost smor

The Beyond Home airbed scored highest in our puncture-resistance tests.

It holds certain advantages over PVC – flexibility, sturdiness, and tolerance to extreme temperatures.

Because it’s created from a bio-based material rather than synthetic polymers, it’s also more environmentally friendly than PVC.

(0 to 7.5 points in our ratings)

Air mattresses with heat-welded seams will be more resistant than those with glued parts.

In simple terms…

You use a special machine that zaps the edges of the vinyl with a lot of electromagnetic energy. This melts the edges and makes them stick together, kind of like how welding metal works.

The result is a tight, strong seam that won’t let air leak out.

It’s more about leaks than punctures

Sealing is not directly related to the air mattress being puncture-proof; it’s more about air leaks.

Still, it ABSOLUTELY deserves a mention in this context.

Why?

Because if you’re looking for a tear-proof airbed, you’ll likely hate one that deflates because of separate seams.

Here’s some data from our testing comparing heat welds to glue.

The two columns refer to joining parts of an air mattress of the same thickness and finish vs. different.

The latter is the more important point.

We also tested to see if the types of joints affect the puncture resistance of an air mattress.

The results indicate no direct correlation.

In plain terms – seams are about leaks, not punctures.

Specific beds

Enerplex is the only bed on our list that explicitly has lists heat-welding in their manufacturing practices. However, I know that most of the better ones use heat.

The difference is to what extent and at what parts.

The test results below are from generic air mattresses we’ve received over the years, and some of them go on to become brand names.

Sewn and double welded

Some air mattresses also have reinforced seams that are stitched or double-welded. That adds strength and durability.

Unfortunately, this practice is dying out since modern technologies are making it obsolete (in theory)…that especially goes for sewing.

And the heat-welding has gotten to a point where a single pass is just as good as double welds.

The secret of the industry that few people will talk about is this – it’s more about the machine doing the welding than the single vs. double welds.

Make no mistake – with all other things equal, a double-welded vinyl will be less prone to leaks.

Double heat welds for indestructible, unpoppable air mattress seams

Indirectly, that translates to puncture resistance because it makes the seams practically unpoppable. We’ve already established that an airbed with a higher incidence of inner chamber problems will also be more prone to punctures.

With that said, if we’re talking about the same machine, a double weld will lower the leak incidence.

(0 to 12 points in our ratings)

This section is not about our tests, but about factory-testing as part of the manufacturing process.

I’ll be blunt – I know which of these brands gets their stock from factories with good testing practices.

And it’s of HUGE importance.

Why?

Because we can talk seams, materials, and puncture resistance ‘till the cows come home, but actually testing the airbeds before they ship out is crucial.

For this guide, I ONLY considered the airbeds that are tested for puncture, leaks and popped seams by the manufacturers. I have detailed evidence on that testing, but going into it here is way out of the scope.

It also wouldn’t add any value to you, so I won’t get into it.

(0 to 11.6 points in our ratings)

If there’s a road to creating a nearly indestructible, unpoppable air mattress, then it absolutely is not over-engineering the bed itself.

I’ve said it before, and I’ll say it again – no classic design will be puncture-proof.

The ones that can truly be called “puncture-proof” are a whole separate category of products – they’re wrapped in layers of sponge and textile and cost an arm and a leg.

In fact, they cost more than a regular mattress.

But I digress…

If you want to get an airbed that will be resistant to tears and pinholes, the best you can do is pair it with a puncture-proof air mattress cover.

The bad and the good news about puncture-resistant air mattress covers

The bad news is that the market for tough air mattress covers is lacking for some mysterious reason.

I don’t know why that is.

It’s lacking to the point where an average buyer would have a hard time finding one.

The good news is that I’m on top of things

I keep an extensive list of covers.

That’s why I recommend the cover we mentioned – the Moonsea – click here to skip back to it.

That one is currently rated at 91/100 in the puncture-proof quality category, and it’s deep enough to accommodate any bed on our list.

Airbed puncture resistance testing data – with and without a cover

Table

graph

(0 to 5.4 points in our ratings)

This category is pretty straightforward because it’s not really about resistance to puncture – it’s about the ability of an airbed to cope with minor leaks.

What’s it all about?

Some of the more expensive models feature a “smart” or a “never-flat” pump.

That means it’s packing a sensor that recognizes air loss (low pressure) and turns on the second pump.

The secondary pump is there to prevent deflation.

Understand it, and you won’t be disappointed

I’ve been explaining the limitations of these pumps for as long as I can remember.

If you’re reading this, you’re now in the 1% of educated buyers.

It’s common sense…

The secondary pump is not there to deal with damage – be it punctures, tears, or even pinholes.

It’s there to deal with the “naturally-occurring” air loss.

In other words – they are great, and you should absolutely get a bed with one if you can afford it, but they DO NOT make for puncture or leak-proof blow-up mattresses.

Below is an excerpt from our database on puncture statistics in airbeds that do/do not have a smart pump. You’ll notice no significant difference in puncture incidence.

There is a difference, however, in both objective and subjective findings of absolute air retention.

(0 to 5.4 points in our ratings)

This category is pretty straightforward because it’s not really about resistance to puncture – it’s about the ability of an airbed to cope with minor leaks.

What’s it all about?

Some of the more expensive models feature a “smart” or a “never-flat” pump.

That means it’s packing a sensor that recognizes air loss (low pressure) and turns on the second pump.

The secondary pump is there to prevent deflation.

Understand it, and you won’t be disappointed

I’ve been explaining the limitations of these pumps for as long as I can remember.

If you’re reading this, you’re now in the 1% of educated buyers.

It’s common sense…

The secondary pump is not there to deal with damage – be it punctures, tears, or even pinholes.

It’s there to deal with the “naturally-occurring” air loss.

In other words – they are great, and you should absolutely get a bed with one if you can afford it, but they DO NOT make for puncture or leak-proof blow-up mattresses.

Below is an excerpt from our database on puncture statistics in airbeds that do/do not have a smart pump. You’ll notice no significant difference in puncture incidence.

There is a difference, however, in both objective and subjective findings of absolute air retention.

Below is a brief overview of what we did to get to the top picks. We’re proud of how we go about air mattress testing and research because it’s superior to anything out there.

I have only one more site in mind that goes into the same level of detail, but they focus solely on camping airbeds.

Here’s a top-level overview:

Based on the existing air mattress database (over 300 models right now), we chose 50 candidates with the highest resistance ratings.

I understand that this is an approximation in and of itself. That’s because, among the remaining 250, there might be an airbed with high puncture resistance.

But if it’s not tough overall, what good is that for you? You won’t be picking at the thing; you want a bed that sleeps well and does not lose air – be it because of leaks or punctures.

For the 50 candidates, we defined criteria by which to measure resistance to punctures:

1. This includes stuff like the tensile strength of the vinyl (thickness and quality), inner chambers’ strength, the technology of joining the seams, leaks around the pump, etc.
2. That resulted in 14 factors contributing to an air mattress being puncture-proof/resistant.
3. Step 1-3 concludes the theoretical part of the rating.
4. We contacted all our testers and asked whether their airbed fell victim to a puncture.

If it did, we asked follow-up questions:

• When did the puncture happen?
• Did the air mattress remain puncture-free at the 1, 3, 6, and 12 months mark?
• How often was it used? This is to establish a more accurate connection between wear and punctures. The good part here is we pick our testers so that the airbeds are actually used. Still, frequency of use is an important data point in the context of puncture incidence.

We also asked the testers who had not used the airbeds to dust them off and inflate them and see if they spontaneously developed a puncture.

Yes, this is absolutely a thing. If you ever left a vinyl wallet in a drawer for a few years and came back to a cracked top, you know.

Additional steps:

 – We looked at forums and other web sources to add to the existing data.

– This only helps with the more popular models that people actually talk about. The criteria we established here is the percentage of shared experiences that mention “puncture” (tear, nick, hole).

Secondarily, we looked at mentions of leaks.

Based on all these steps, we defined and tweaked the rating criteria and chose the products to recommend in the two categories – puncture-proof air mattresses and covers that might make it so.

If you accept that no classic airbed is absolutely puncture-proof, the choice comes down to two things:

1. Statistics on puncture resistance – incidence over time.
2. Add-ons that will help – covers and pads.
3. Customer service of the company if a puncture does happen.

Choose right at each step, and you’ll dramatically lower the chances of waking up on the floor.

Based on my calculations, you lower them by over 70% if you go with one of our picks and pair it with a cover – click the orange button below to skip back to the table with the picks.

Updated for: 2025

Skip to section

* The weight capacity I’m listing here is for the Queen raised versions or higher. If you’re looking for a Twin, the capacity is about half of the one listed. For King or California King, that number might be 20-35% greater.

When I say “the only guide,” I honestly mean it…

When preparing to write this guide, I read everything and anything that exists out there.

Gotta tell you…it’s slim pickings.

Everything I’ve seen is commonplace and doesn’t specifically focus on height.

This page does exactly that.

What I mean by “right airbed for you”

Being “right for you” means it won’t be a waste of money and have you (or your guests) waking up on the floor.

We’ll look each and every aspect of choosing a good tall air mattress based on data and experience.

 I know everything about these beds…

• If they’re made in the USA or Europe in a small family business, I know the families making them.
• If they’re made in China, I know the factories and the little towns where the factories are. There’s a good chance I know the line managers, too.

I know…I’m bragging…if you call air mattress knowledge bragging (nerd alert!).

But hear me out…

This is really what I’m saying –  I can tell you about the underbelly of the industry.

• I can tell you which of these will likely lose air and leave you sleeping on the floor.
• I know which of these are overpriced and which over-deliver for the money.

Simply put – I’ll help you choose a tall air mattress that ticks all the other boxes too.

Why is that important?

Because if you go by height alone, the chances of choosing right are low…I know a few tall airbeds that leak like a sieve and they come from reputable companies.

Luckily, I know the other side of that medal  – air mattresses that are just as tall, but good.

Some very good, some great. Some way cheaper, too.

Anyway, I’m getting carried away, let’s get to the beds that made the cut.

What Was Updated for 2025

In this 2025 update, we’ve refined our approach to ranking the air mattresses. Several key changes were made to ensure our guide remains the most accurate and helpful resource available.

This year, we expanded our testing pool from 60 to 80 airbeds, incorporating newly released models and comparing them against our previous top picks. Testing methods were enhanced with a stronger focus on long-term durability, height retention after extended use, and noise levels during inflation.

Additionally, weight distribution metrics were improved to better simulate real-world sleeping conditions.

We also adjusted scoring weights for criteria like comfort and air retention, based on reader feedback from last year. For transparency, we’ve updated our visuals and data tables to include two new proprietary metrics: the Height Retention Index (HRI) and Stability Coefficient (SC).

Lastly, user reviews and direct feedback from manufacturers were incorporated to provide a well-rounded evaluation of each product.

Tallest air mattress – our top overall pick for home and camping – Ivation EZ Deflate Defender

 Main benefits of Ivation EZ – quick intro

Height per air volume

The graph below tells a story – one of significantly less air per inch of height – 150-250% less.

That translates to less pressure exerted onto the walls and lower chances of leaks developing over time. That’s not the full story, but it makes all the difference.

 Low HAV also means less wobble

It also means less wobble than the classic models. This wobble is a result of the oversized chambers.

Now, all this wouldn’t mean much if Ivation didn’t get the basics right with this one – the vinyl, seams, and the pump.

I’m stressing that because this is not the only EZ bed out there – in my time in the industry, I’ve seen a dozen come and go.

In the last 5 years, this is the bed that consistently scored high in most categories we test and, and all of the crucial ones.

How it compares to similar EZ designs

It’s higher and rated better in most categories

By “similar bed” I mean the EZ designs with the frame. There are a few that come to mind and they’re inferior to Ivation in one of two ways – they’re either not as high or they’re rated lower in other categories, like air retention or comfort.

How it compares to the classic designs

Comparing Ivation EZ to other tall airbeds of classic designs is an apple-to-orange comparison in many ways.

For one, there’s the superior pump, which is also one of the two main reasons for the higher price tag (the other one being the frame).

Sure, you could go broader and compare it to some of the “never-flat” models that are built around a similar pump, but all of those are much lower – typically 18-20 inches high.

There’s one extra-tall air mattress that’s as high (which we’ll talk about in a hot minute), but it doesn’t really compare to Ivation in air retention and incidence of air leaks, especially in Queen size.

Height-centered rating: 91

Overall rating: 87.4

#2 – BeyondHOME Odorless – a tall air mattress with an extra-high weight limit

 Main benefits of BeyondHOME extra-tall airbed

Unique combo of height, materials and weight limit

This is the highest air mattress I know that also has a weight capacity of over 700 lbs.

And that goes for available heights – 15, 18, and 22 inches.

What to expect from the material

Firstly, TPU combined with polyester feels less “plasticky” and more like a textile than your average flocked vinyl.

Secondly, it’s not as hefty, which means that it packs deceptively small for the extra height.

To be specific – you’ll probably be taken aback when this thing arrives.

A double-high Queen air mattress might appear as a Twin when packed down, and a twin might look like a Twin.

Not as big of a deal as they make it out

Personally, I think they make way bigger of a deal from the size than it is.

It is a benefit of sorts, but only significant if you’re sleeping on it daily and packing it away in a small space.

In all other scenarios, it’s not a big deal.

What is a big deal

The bigger deal here is the TPU.

If you’re a health-conscious person, you’ll like the fact that TPU does not off-gas nearly as much as vinyl.

This means two things:

1. You can start using it right away, with little to no airing out
2. It will smell less – the smaller the room you’re putting it in, the bigger the deal this is

Now, is it really “odorless”?

Not really.

I noticed a bit of a smell out of the box, just not nearly as much as with 95% of inflatable beds that I tested over the years.

The remaining 5% are reserved for low-profile camping beds, which we are not interested in today.

Height-centered rating: 88.4

Overall rating: 86

Highest air mattress among the classics – Brookstone Innovations Twin-size

Quick video intro to the tallest classic airbed by Brookstone

I expected to see this bed at #1

When I was setting up to write this and gathering data, I absolutely expected to see this Brookstone topping the list of the highest air mattresses.

I like the pump, I like the contours of the top, I like the muted-down colors that stand out in a sea of blues and dull grays (yes, this one’s still gray but stylish).

I like everything about this bed.

That was all based on data I was aware of prior to 2022.

I have no explanation for this, but, in Queen size, this bed did not perform as expected in our tests and statistical analysis.

In full size, it did OK but, again, not as expected.

It did great in Twin-size, which is a bit counter-intuitive.

 Why counter-intuitive?

Because if we weren’t talking about the Brookstone, I’d say that 24 inches is too high for a Twin.

What might’ve happened with the Queen size

I’m looking at the dates now and I can only assume that it’s one bad batch that’s probably on its way out as I’m writing this (in 2025).

This means I expect the good ol’ bed I know to be back…and soon.

Height-centered rating: 88.3

Overall rating: 82.6

Tallest air mattress for those on a budget – Intex Comfort Elevated

Quick intro to Intex Elevated

Top value in the height category

If I was on a tight budget and looking for an airbed for occasional use, I’d get this Intex.

It’s not great, but it is very good for the money.

I’d even say it’s the top value among 22+ inches high air mattresses.

That’s what earned this bed a place on our list of best air mattresses with a built-in pump – yes, overall.

So, that tells a story.

A story of curbed expectations and an airbed that overlivers for 9 out of 10 people….that’s my guesstimate.

What do I mean by “curbed expectations?”

• Don’t expect a fast pump.
• Don’t expect quiet inflation.
• Don’t expect a seamless warranty claim if your bed develops a leak.

Height-centered rating: 87

Overall rating: 84.2

Active Era Elevated air mattress – solid pick in the medium price range

Overview of the Active Era

Value and height

Active Era is one of my favorites of the newer brands, and this is their staple model.

They targeted the medium price range and did a good job at hitting all the key milestones.

The pump is not as fast as that on Brookstone, but this bed is about half the price.

So, there’s that…

It received middle-to-high ratings across all categories – both related to height and the general categories.

Height-centered rating: 86.3

Overall rating: 83.4

Best raised air mattress – honorary mentions

Below is a list of high and tall air matresses that didn’t make it to my top 5…some of them by thin margins.

I’m including the names, heights, relevant indexes, sizes and categories in which these were contenders.

Below is an in-depth guide on choosing an extra-tall high-rise air mattress

It’s meant to do 4 things:

1. Explain how we made our picks – the process, first-hand testing and how that translated to ratings
2. Present the testing results
3. Help you choose if none of our picks fit the bill
4. I’ll try to be concise yet helpful

This is what we’ll cover:

1. Air retention of a high airbed (avoid waking up on the floor)
2. Comfort in the context of height (stuff to stay away from)
3. Height vs. size (what it means for stability and a extra few tips)
4. Home use vs. camping in different elevation categories
5. Pump of the high-rises
6. Materials
7. Price ranges
8. Warranty terms

What went into creating this guide

Top 5 out of 60…what does that mean?

It means I’ve spent the last few weeks comparing existing data and finding new information to choose the 5 beds presented here. These are all beds I’ve personally used and tested at some point over the years, so it’s first-insights.

It also means the airbeds in our top 5 are not only tall or large, they’re also good in other crucial aspects.

I mentioned them above…

Here’s what to expect exactly

I’ll cover a range of categories – tall (tallest, highest), double-high/raised in different sizes (Twin, Full, Queen).

The industry terminology varies so you might see these terms used to describe these beds, too: raised, elevated, large, high-rise, extra-high.

I know it’s all confusing…I’ll help with that.

But here’s the thing – 7-8 minutes here can save you massive time, money and headache down the road.

Since then, I’ve spent my days researching, testing and writing on all things air mattresses.

 Let’s into the nitty-gritty of two things:

1. What height to aim for if you’re looking for the tallest air mattress
2. What quality aspects are crucial beyond the height
3. What I looked at to find my 5 picks

This section is an immensely useful read if you want to understand what you’re spending your money on.

I’d say that any blow-up bed that’s 18 inches or is tall. I’m just looking at my database that contains over 400 airbeds we analyzed so far.

Any bed in that height bracket (18+ inches) belongs to the top 3% of tallest air mattresses.

Height of airbeds for home use

About 70% of the beds for home use are either 16 or 18 inches tall – that’s by far the most sought after height and it’s the category that manufacturers pay the most attention to.

Why is that important?

It’s crucial – the supply-demand defines how well the beds will be controlled before they leave the line.

Now, the tall air beds you see among my top picks are a bit different.

Let me use plain language here – some airbeds are just not big enough to be extra-tall and still maintain stability.

In the section below, I’ll get ultra specific on why that is.

Twin tall air mattress – a balance problem

If you have an extra all air mattress, the minimum size that’s still stable is full. Below that, the bed will wobble, no matter how good the chambers are.

A 30-inch high inflatable just won’t work unless it’s only an inflatable core wrapped it foam and textile.

Bottom line – if you’re getting a twin, go for a max of 16 inches for stability. You can get away a tall twin air mattress (18+ inches) if it’s going against a minimum of one wall or a corner.

Tall queen air mattress – the sweet spot

In queen size, you get more freedom to choose without compromising stability. theoretically, you could go up to 30-inches tall and an inflatable bed with standalone chambers will still go strong.

I could go into details and the physics of it, but that would bore you to death.

I’ll stay on the actionable side.

My advice when choosing a tall queen air mattress – shoot for the 18-24 inches range of height. It’s where the top value is.

Let me use plain language here – some airbeds are just not big enough to be extra-tall and still maintain stability.

In the section below, I’ll get ultra specific on why that is.

Twin tall air mattress – a balance problem

If you have an extra all air mattress, the minimum size that’s still stable is full. Below that, the bed will wobble, no matter how good the chambers are.

A 30-inch high inflatable just won’t work unless it’s only an inflatable core wrapped it foam and textile.

Bottom line – if you’re getting a twin, go for a max of 16 inches for stability. You can get away a tall twin air mattress (18+ inches) if it’s going against a minimum of one wall or a corner.

Tall queen air mattress – the sweet spot

In queen size, you get more freedom to choose without compromising stability. theoretically, you could go up to 30-inches tall and an inflatable bed with standalone chambers will still go strong.

I could go into details and the physics of it, but that would bore you to death.

I’ll stay on the actionable side.

My advice when choosing a tall queen air mattress – shoot for the 18-24 inches range of height. It’s where the top value is.

In the table and graph below, you can see our proprietary metric – the SH coefficient. It’s the ratio between the top surfaces and the highest version of the air mattress.

As it’s to be expected, the HS index is pretty close across the board.

For simplicity reasons, we did not include tables and graphs for the smaller versions because it’s almost a rule that a high HS in, say, Queen size, also means a high HS in other sizes.

How to interpret the surface-per-height index

The higher the SH index, get more usable surface per inch of height. If you get below 18 inches, the HS would grow but would be for little use.

We are interested in airbeds that are higher than 20 inches.

In that range, a high SH index is an indication of a comfy, stable bed that sleeps well.

This is the section that ties back with the stuff I promised to cover at the very beginning.

It’s about choosing good value for money even if you don’t go for any of the recommendations we listed.

If you take five minutes to read this, you will be in the top one percent in terms of understanding and choosing a good blowup bed in different sizes and height categories.

Air retention of a tall air mattress

(aka. how not be wake up on the floor)

There is a good reason that most inflatables are up to 18 inches tall, even the high-rises. The air circulation within the chambers is one of them.

The higher the air mattress the more room for air to circulate and more room for the creation of extra “dense” pockets of air.

Those pockets carry pressure and can even pop a seam.

What it means for choosing an extra-high air mattress

It means that if you go with a high-rise airbed that’s 20 inches or taller (maybe even 18), you’ll need to make sure you’re choosing one that meets the following criteria:

• It’s comprised of a high number of vertical chambers – the more of these the lesser the chance of high-pressure areas
• The seams are strong and heat-sealed
• The vinyl is at least 0.4 mm thick

Choosing a tall airbed that ticks these boxes will minimize the chance of air leaks, and that’s a number one problem people experience with new inflatables.

Important: All our picks meet and exceed the quality criteria above.

Intuitively, you’d say that the higher the air mattress, the more comfortable it will be. That’s not necessarily the case, and it’s usually because the model is too soft.

Some of the highest air mattresses did not make it to the list of our top picks because of problems with comfort.

And it’s all related to the previous point of air retention.

What it means for choosing a double-high air mattress

If you go with an extra-tall airbed, you’re better off with one that features a never-flat pump.

That’s because being too firm isn’t going to be a problem but becoming too soft as the night goes on can be a problem.

A never-flat pump that adds air when it “senses” a pressure drop solves that problem.

This one is important because there are precise limits I have set based one the testing results I’ve seen over the years.

This one is important because there are precise limits I have set based one the testing results I’ve seen over the years.

In our testing and data analysis, we’ve seen no direct correlation between height and price.

It is true that our top pick among the high-rise air mattresses is also the most expensive on the list, but that’s because of the frame, not the height on its own.

This one is important because there are precise limits I have set based one the testing results I’ve seen over the years.

This one is important because there are precise limits I have set based one the testing results I’ve seen over the years.

Quick links

Hi, and welcome to our monthly update to the guide on best air mattresses for guests and everyday sleep, specifically those with with a built-in pump…the airbeds have the pump, not the guests…

Anyway, who am I to talk?

My name is Bob Ozment and I’ll be your insider for the day…to the industry of top inflatble beds.

And trust me, you really do need one.

With all the shady outsourcing practices and low-quality products flooding the market, the last three years have been especially baffling if you’re an average buyer looking to get a good inflatable bed.

Updated for: 2025

How to find exactly what you’re looking for

Take a moment to watch the video reviews of the air beds – these stress their PROs and CONs of each and should tell you all you need to chose right.

To do that, just click the red button in the table that says “See all quality ratings” to skip to the analysis of a specific product.

What’s new in the 2025 update

This month’s update brought some slight changes in the rankings, but it’s nothing to write home about – the blow up beds that were top-rated in previous updates continue to dominate in most quality categories.

Other news is that, in the winter months, we shift the ratings a bit to award the ability of the bed to keep the guests warm. Every test we’ve done on that usually involves a nice cozy blanket. If that sounds like something you might be interested for with your guest part, you can see the test results for the warmest blankets here.

In more general terms

For 2025, we made some tweaks to keep this guide as helpful as ever. We updated the ratings to focus more on comfort for guests, storage ease, and how well the beds keep warm in colder months.

We also added feedback from Reddit and other trusted sources to make the picks even more balanced. Plus, new categories like “top picks for seniors” were added based on what readers asked for.

These changes make sure you’re getting the most up-to-date advice for picking the perfect air mattress for your guests.

Special attention to different types of guests

We’ve also made specific adjustments by guest type and looked to people who needed extra weight to be comfortable on their stay with you.

If the airbed and the cover isn’t enough – a weighted blanket might do the trick – you can see our tests results on heaviest and biggest weighted blankets here.

Significantly bigger data pool

We can confidently say that the amount of testing data we’re basing our rankings on is now second to none. We managed to ship out a significant number of products to field testers before the current crisis. The point here is that the ratings are still a “living” thing that changes to keep up with the market.

Most importantly, we took special care to identify any changes in quality of our picks. It’s a good thing when we don’t see disappointments there. It’s typically a sign of healthy market trends – solid new arrivals keeping the industry on their toes.

We also constantly add new categories to nmake the picks more granular – click the following link to see the latest addition to that portfolio our guide on the highest air mattress.

The ratings here are provisional as we wait for the potential return of the bed.

We don’t like recommending stuff that you can’t find, yet we are not comfortable of getting rid of this entry – let’s wait for a while and se if it comes back.

Best-rated air mattress with built-in pump – a closer look

No airbed manufacturer will ever recommend to use their air mattreses as a permanent bed.

So, neither can I…

This is what I can do – tell you my opinion on which would be the best if you chose to do so.

Anyway…

What’s the best and why

The best air mattress for everyday sleep is Ivation EZ because you get more than the support of air. Out of 14 people we interviewed about this, 11 chose the Ivation or some other EZ. Generally, the problem with sleeping on it everyday arises from the air saging inside.

So, you need an actual frame…it’s prettty much the same thing as a regular mattress…and I don’t recommend only memory foam.

The main benefits for everyday support

Think of the frame as the springs – it gives you that additional support that an huge lump of air just can’t.

There’s also less pressure build-up for the seams and less air leaking. And when it does happen, there’s the adaptive pump that maintains the pressure. It also might be useful insight into why the products we mentioned are a good choice.

Moreover, the automatic setup and packing case make it an excellent option for small homes that can’t spare a dedicated space for a permanent bed.

Tests and results

We tested it – I slept on it everyday for two weeks straight and have seen no issues with my back pain becoming worse. In fact, it might be placebo, but it kind of subsided.

I heard the pump adding air 3 times in two weeks, but I’m a light sleeper. Most people won’t be bothered by this thing. And if you are, remember that it’s teh built-in automatic pump makes it good for everyday sleep.

But, the database of first-hand experiences is just as important as personal testing. Below are ratings based on results from our tests and data from our base of interviews with first hand users.

(DISCONTINUED)(firmest)

Made by industry veterans but now discontinued – here’s what to look at instead

This bed is now discontinued and we’re keeping it on the list hoping it will come back However, it does seem that it’s gone for good because we could’t find it anywhere…and we obviously know all the places to look.

There was so much fuss about this bed for the past few years that we actually waited for it to hit the market (a few years back) to be able to test it and include it in this guide. It did take them long to design it and start production, so it is a pity they’re not making it any more. It used to be one of our top picks in two major categories:

• most durable – you can see the updated guide here
• best twin with built in pump – you can see that guide here

For easier navigation, the rest of the guide is divided into sections.

Click the button that best describes the air bed you’re looking for.

Reference info, other types & picks

Because getting air bed for a weekend visit from your cousins from Connecticut is not the same as choosing an air bed for that guest room you want to be proud of.

Our pick for guests is Serta Raised Pillow Top.

It’s an inflatable mattress that’s easy  set up and down, store, move and fit wherever you want.

The Never flat pump eliminates the risk of your guest waking up on the floor (more on never-flat pumps in a minute).

Compiling a well-rounded list of best airbeds for outdoors is not an easy task.

So, we’ll make an effort to present a few main types of air beds for outdoorsand our picks in those categories, but the decision about which type is a good fit for you comes down to your needs. It’s a cliche but it’s true.

• Do you need it for backpacking or other outdoor use?
• Do you have access to power on the site?
• Do you need a built-in, battery-operated or a rechargeable pump?
• How big is your tent bed?
• What is the type of your tent and how does that affect the profile height of the air bed that will fit?

To see the full list of Top 10 click below.

The fact that it’s mounted on a steel frame means you’ll be sleeping well away from any pesky buzzard that might otherwise crawl up the sides of a regular bed.

On the other hand, the blow up mattress is not attached to the frame but to the fabric sleeve.

Being the official air bed of the National Park Fooundation among 100s of inflatables is no small thing. The Coleman SupportRest is an industry classic and has been of of the best outdoors air mattresses for years.

It deserved the title by being better in pretty much every aspect that matters, from air retention and support to a stable and firm sleeping surface.

• No sinking to the middle of the bed – support and firmness ensured by what Coleman calls ComfortStrong inner coild construction
• No air loss – Coleman’s proprietary AirTight System with a double-lock valve
• Heavy duty material – multi-layered PVC is much less likely to be punctured and doesn’t stretch as much as regular PVC which puts less stress on the seams

Camping Series – best outdoor air mattress among low-rises

Compared to the Coleman models above, this is a “young” product.

It hit the market in the spring of 2015 but it wasn’t long before it became toprated in user reviews and had the highest % of user satisfaction.

Best air mattress for kids and toddlers is one of the categories we had to get help for. We found it in the awesome community of Mom bloggers.

We sent out 12 airbeds for kids to 12 and moms and asked for their impressions.

The results are clear – by far the best blow up mattresss in the category is the Shrunks Tuckaire, with the Intex Kidz being the runner-up.

If you already have a size in mind, the process of choosing is simplified by a factor of 10.

Because the 2 best blow up mattresses cover all the sizes except single and twin. The Cloud Nine comes in Queen while  the Bamboo Choice comes in 4 sizes, starting from Twin Xl. Our pick in Twin size is the model that 4th in overall ratings – Dream Series by SoundAsleep.

See our reccomendations sorted by size below.

Bamboo Best Choice review

The dimensions of both models are 73 x 29 x 7.5 inches.

The difference between the two single models is that one comes with a battery-operated pump (4D cell), and the other comes without a pump

However, any standard hand or leg pump will work for both.

According to reviews of our testers, the best twin air mattress is the Dream Series by SoundAsleep. Rated at 92.2/100, our pick in Twin size is the product that’s been by fast the most popular over the last few years.

The difference between the Dream Series and Cloud Nine and (both coming from SoundAsleep) comes down to the pump and price.

The Cloud Nine includes a Dual Smart Pump, while the Dream Series comes with a regular built-in pump.

Oh, and yes, The Cloud Nine cost much more – almost 70% more to be precise.

This inflatable mattress is currently highest -rated overall and it’s, naturally, our pick in Queen size.

Current gap between the Cloud Nine and the runner up is a hefty 0.4 and, looking at the reviews and test results, we don’t see that gap closing any time soon.

5 top-rated inflatable mattresses in the size category

Best air mattresses in Full (Double) size are:

Model	Height	Pump	Weight limit
Bamboo Raised	19 "	Built-in	600 lbs
Fox Plush	25 "	Built-in	700 lbs
SimplySleeper SS-58RF Full	18 "	Built-in	600 lbs
Coleman QuickBed Single High	8 "	Built-in	600 lbs
Intex Comfort Plush air mattress	13 "	External, not included	600 lbs

5 best air mattresses in Queen size

5 top rated air mattresses in the size

As you can see, not much has changed in the ratings in this month’s update. The only new arrival to the list comes from Aerobed.

That speaks towards the reliability of our rating systems.

The runner up air mattress on Wirecutter is the interesting part – they went with a good ol’ Coleman. We’ll have to dig deeper into that in the next update.

Here’a link to their analysis.

One thing is for sure – with all the great testing the good people over there are doing, it’s worthy resource…even when it means paying for a membership.

This is their dedicated page.

Why the Reddit air mattress community is a great source

Furthermore, it’s often the people who had bad experiences withother models reach out to the Reddit air mattress community….if such a thing exists…you know, the people on the site that have experinbce with airbeds.

We even offer advice on the site when we feel we have something usefull to contribute.

Reddit’s verdict: most popular picks on the site are cheaper models like Intex or some of the popular ones – the mentioned Dream Series and the like.

Here’s one of the more recent threads.

Eever since we first published this guide, we’ve been receiving questions about this. So, let us take a moment here and be as precise as we can about height and the way different brands describe it.

Click on the tabs in the boxes below to read more.

Low profile

Raised  or high-rise

How much much weight can an air mattress hold?

Weight capacity of an inflatable bed depends on two factors – the size and whether it’s used by one or two people.

These are the weight limits of an air mattress:

Mattress size	Twin	Full	Queen
Weight capacity	300 lbs for 1 person	450 lbs between 2 people	600 lbs between 2 people

Memory foam – superior comfort

Pillow top air mattress

Air mattress with a headboard

Luxury air mattress (adjustable)

Sleeper sofas

Recommended products

The most trusted brands among low air loss and alternating pressure mattresses and pads are: Drive Medical, Vive and Invacare. To decide which one is right for your situation, you can see top products compared in the full guide (link below).

Trucks

Jeep air mattress

RV air mattress

Car and travel (for SUVs & minivans)

Backseat air mattresses

The industry is changing fast but, judging by the product ratings, the most trusted airbed companies today are: SoundAsleep, Aerobed, Coleman, Fox, Serta and Insta.

On the other hand, you have companies like Intex that are more oriented to being budget-friendly. You can see our top picks among Intex air mattresses here.

Brand	Year Founded	Better Business Bureau Rating	Top Model	Warranty Type
Aerobed	1992	A+	Aerobed Classic	1-Year Limited
Coleman	1900	A+	Coleman SupportRest Double High	1-Year Limited
SoundAsleep	2013	not listed	Dream Series Queen	1-Year Full
Airmattress.com	2013	A+	Best Choice	1-Year Limited
Fox Airbeds	2012	not listed	Fox Plush	90-day full, 1-Year Limited
Serta	1931	A+	Serta Raised Never Flat	2-Year Full
Insta	2011	not listed	Insta Never Flat	1-Year Limited

About our reviews

What we tried to do in this guide is make a most well-rounded list of best air mattresses out there, both for home use and outdoors.

We stay on top of things by updating the reviews with new impressions and rating once a month.

We’re also adding a guest-focused metrics all the time and body of data grows. A few examples of metrics like that are:

• guest satisfation when used for the weekend,
• guest comfort for 3+days of use
• convenience for guest rooms (cord ans storing options)
• perceived change from “regular” bed
• sleep depth of guests compared to regular bed (this one will recuire more time because it involves tests and sleep trackers, all performed by our featured testers and our in-house team)

We couldn hot have imagined this data scope just a few short years ago….because this started out as a general guide and, based on what people were asking, evolved to be all about welcoming guests.

If we helped, we’ll sleep well tonight…

Well, except for Bob who drinks half a dozen Red Bulls a day. Yes we know, we’ll have to do something about that, Editor of a sleep website becoming an insomniac doesn’t look good.

If you still have questions on your mind, shoot us an email or use the comment sections to share them so that other people with similar questions will benefit from the answers in the future.

We’re a small team, but we take special care to respond to all correspondence and comments within 1 day.

The Sleep Studies team

These sounds are usually referred to as noise colors and there are three most common types which are white, pink, and brown noise color.

Noise color sounds will help and remove any background noise thanks to the frequency levels used. It will put you to sleep more easily and will make sure you aren’t waking up during the night which is really important.

As you now know that there are three most common color noise sounds. But something you don’t know is how they work.

Also, you don’t need to necessarily sleep to these types of sounds, as they can also help you improve your concentration when needed or just help you relax after a long day of work.

White color noises for sleep

White noise are basically frequencies that are equally flat all the time. It might be hard to understand it, however, after a few examples, you will understand. They are great at removing the background noise which is really helpful during the night.

Waking up in the middle of the night is bad for your sleep since you are stopping the sleeping cycles each time you wake up. For example, a white color noise will help to remove the background noise and help you focus so you can fall asleep more easily while maintaining the sleep.

If your family members are noisy, or your neighbors are slamming their car doors way too early in the morning, white color noise could help you with that. It will remove the background noise and help you stay focused on the white color noise during your good night’s sleep.

As you now know that there are three most common color noise sounds. But something you don’t know is how they work.

Also, you don’t need to necessarily sleep to these types of sounds, as they can also help you improve your concentration when needed or just help you relax after a long day of work.

White color noises for sleep

White noise are basically frequencies that are equally flat all the time. It might be hard to understand it, however, after a few examples, you will understand. They are great at removing the background noise which is really helpful during the night.

Waking up in the middle of the night is bad for your sleep since you are stopping the sleeping cycles each time you wake up. For example, a white color noise will help to remove the background noise and help you focus so you can fall asleep more easily while maintaining the sleep.

If your family members are noisy, or your neighbors are slamming their car doors way too early in the morning, white color noise could help you with that. It will remove the background noise and help you stay focused on the white color noise during your good night’s sleep.

• Light sounds of rain
• Hissing steam
• Television static

There are many more examples, and I am sure light sounds of rain is a perfect example to understand the white color noise. Another example which many people will know is the static sound of the television when it’s set on a different frequency than it’s normally used to.

Most likely you get the idea, and you might wonder how does it actually help you to sleep better. Well, some people get sleepy just by listening to the white color noise.

It cancels the surroundings and your brain only focuses on that one particular type of noise. It helps you to concentrate and it will prevent your brain from overthinking things so it will help him relax more easily which leads to better sleep, and also you will be able to fall asleep faster than before.

Pink color noise is similar to the white color noises, however, it works a little bit different. White color noise uses higher frequencies which are equal all the time, while pink color noise uses lower frequencies at higher volumes.

People like to think of pink color noise as a white color noise, just with a bass sound added. It uses lower frequencies, however, it’s usually deeper than white color noise. For everyone who thinks that white color noises are harsh and thin, pink color noise might make them feel better. Pink color uses noises from all the spectrum at lower frequencies which makes the sound deeper and gentler sound.

While white color noise is one of the most known noises for improved sleep, pink color noise has the same benefits. It sounds different, however, it still provides better sleep by helping a person focus. Pink color noise doesn’t need to be used for sleeping purposes. It can be used for focusing on important things during work or studying for example. It also has the ability to alleviate headaches or even sooth babies and young children. Sleep sounds for babies and newborns are proven to help them sleep better.

Sleep sounds for babies and newborns is a common technique practiced by the parents nowadays.

Again, it might be hard to understand the difference between the sounds, and how do they actually work until you learn the examples and listen to them yourself.

• Heavy rain
• Rushing water
• Strong wind through leaves
• Air condition

While they still can cancel the background and benefit your sleep, they can be also used for focusing and relaxing. Heavy rain sounds for sleep and rushing water sounds are great examples, and they provide the difference between white color noises such as light rain sounds for sleep or static television sound.

Also, have you ever noticed how sleepy you get during the car rides on a highway, or train rides? It’s mostly because of the noise car or train produce when driving at the same speed. Although, temperature plays the big part as well. But a car or train consistent sound can be a good example of pink, or even maybe a brown color noise which I will mention later in this post.

Brown noise is the third color from the most common noise colors. It’s also the least researched one

Many people rely on the white or pink color noise, while brown color noise has a lot to offer as well. An interesting fact would be that the brown name doesn’t derive from a color name, yet from a person named Robert Brown. He discovered the Brownian motion that generates brown noise.

Brown color noise is similar to the pink color noise. However, it uses the low-frequency sounds but it takes them even further in order to create a noisy pattern.

It’s might be the reason why not many people like the brown color noise, however, there are still benefits for people who do like it.

Benefits of brown color noise would be better relaxation and meditation, improved focus, increased reading comprehension, and like other color noises, it benefits and improves sleep.

• Rushing water (like waterfalls or ocean waves)
• Low Roar
• Deep Hum
• Clothes Dryer
• Train Passing

You must have heard at least one of the examples, and it might not make sense right now such as how can the train passing be relaxing sounds for sleep, however, you would have to try it out and see for yourself the great benefits.

Usually, the deeper qualities of the noise are, the better they are for relaxation and sleeping purpose.

It’s up to you which type of sound you prefer more, and there isn’t the best or the worst color noise. It’s a matter of the personal preference, and there haven’t been done any studies to prove which type of sound is the most effective simply because of that reason.

Ocean sounds for sleep are a great example of brown color noise.

What’s New in 2025: Updated Insights and Recommendations

We’ve updated this page with fresh tips and tools to help you sleep better.

Here’s what’s new this year:

• Latest Research: Learn about the newest insights into how white, pink, and brown noises support better sleep and relaxation.
• New Recommendations: Discover updated advice on noise-canceling headphones and budget-friendly sleep gadgets.
• Improved Resources: We’ve linked to new guides, including the best warm winter blankets and budget noise-canceling devices.
• Fresh Examples: Expanded lists of sounds and practical tips make it easier than ever to find what works for you.
• Expert Advice: Remember, consulting a sleep specialist or expert in sound therapy can provide personalized solutions to improve your sleep.

Sleep machine is a device which produces mostly one or more types of the color noise.

It’s a white noise that people have found it’s the best color noise for improved sleeping. White color noise has the ability to reduce and remove the background noise which benefits and allows people to have a quality good night’s sleep.

Usually, when you’re woken up by a noise in the middle of a night, it’s due to the inconsistency in the same noise. That’s why white noise is good for sleep since it blocks out other inconsistent noises by providing quality consistent background noise which will help you fall asleep faster as well.

Sleep machines are made to produce quality consistent white noise for a better sleep. Although, as I have mentioned sleep machines are mostly made to produce white color noise, however, you will be able to find sleep machines that can produce other types of noise such as pink or brown.

It’s very simple to use a sleep machine as it has only a options to adjust the noise for your personal preference. There is usually a power button with timer included, volume button, and some sleep machines have the option to choose between a fan sound or white color noise.

Fan sound is more likely to be a pink color noise, however, some people can’t fall asleep without the sound of a fan, so that’s why most of the sleep machines come with that option. It’s also a great way to have a sleep machine which is able to produce white and pink color noise.

Overlooked tip – cover the basics with a good  blankie

You can experiement with relaxing sounds for sleeep, but that only covers after you’ve made sure you hav ethe basics covered.

One of the basic is temperature under the blanket – you need to be warm but still allow for breatheability for bodytemperature regulation. If you think this might be a problem for you, you should probably take a look at our guide on best warm winter blankets here.

Active noise canceling headphones or earbuds can do everything passive ones can, however, they have improved structure barriers that block the high-frequency sound waves.

There is a microphone placed inside the earcup which listens to the sounds that can’t be blocked passively, and then it has a little speaker which produces sound waves to block the external sounds. Thanks to the little speaker which produces sound waves, external sound waves can’t disturb our ears.

Although there is a little bit more technology involved in making the active noise canceling headphones, they’re still necessary for people who are battling with high-frequency noises on daily basis.

Also, if you are a regular flier, you might have come to conclusion by yourself that you should probably invest in a good pair of active noise canceling headphones.

Passive canceling headphones are mostly used by the workers who work with machines that produce high-frequency noises, especially inside the room. They use passive canceling headphones not to completely remove the external noise, but mostly to protect their ears from the noise.

Noise canceling earbuds are a great solution if you can’t fall asleep because of the different noises such bed creeks, or birds outside the window.

If you don’t like listening to any kind of noise such as fan sound during your sleep, you could probably help yourself with a good pair of passive earbuds.

Either if you decide to go for active or passive noise canceling headphones or earbuds, investing in one pair is really worth it and can help you sleep better with no noise, and they will also protect your ears from the high-frequency noise.

No matter what’s the reason you can’t sleep – sleep pillow sounds might help you and fix your problems.

Sleep Pillow is an app available on both Android and iOS smartphones, which comes with a lot of sounds specially designed to help you fall asleep faster and sleep better.

Serious sleep disorders might not be solved with the Sound Pillow app, however, if you are simply stressed or can’t sleep in the silence – relaxing sounds of this app will be perfect for you.

There are a lot of different sounds to help you sleep, and you will be able to set the timer as well to stop playing the chosen sound after some period of time. Sounds are expressed through photos, and for example, water sounds will be expressed with a photo of ocean or rain.

It’s mostly about the personal preference, and that’s why the Sleep Pillow is a great app for practicing and experimenting.

In my opinion, ocean sounds for sleep which can be found inside this app, are really great soothing sounds to get a good night’s sleep. However, on the other hand, many people prefer storm and thunderstorm sounds as their soothing sounds.

Our ratings of the EZ model

Unlike other similar models which tend to deflate mid-use due to various factors such as heat, pinhole air leaks, and body weight, the bed stays inflated all night.

The pump

The primary air pump, intended for quick and simple set-up, is capable of inflating and deflating the mattress in less than four minutes.

Aside from the primary pump, this mattress also utilizes patented neverFLAT pump technology (the same pump used in the Serta EZ bed) to ensure that air pressure and comfort remain consistent throughout the night.

Extra air is added automatically if the monitor detects any pressure level changes.

The bed is designed to be just as comfortable, if not more so, than a regular mattress.

With a velour-like flocked top, many customers find that this is one of the more comfortable products on the market today.

With four comfort control settings, the user may select either plush, medium, or firm. This enables you to customize the mattress to fit your needs and preferences.

True to size

When it’s fully inflated, it measures about 80 inches long by 60 inches wide, making it spacious enough for two to sleep comfortably.

Because this mattress is typically used by two people, it’s designed for minimal motion transfer. This means that as one person moves throughout the night, the other person will feel very little movement, if any. In addition, the surface is very well-balanced, so the lighter weight person won’t feel any pull from the heavier person’s side.

Sturdy frame means more support

For those with back problems, blow up beds are a hit and miss. However, your back receives an adequate amount of support, ensuring the proper alignment of your back as you sleep.

Another great feature of the mattress does not sit on the ground due to the sturdy, elevated frame. This means the mattress doesn’t get cold, which is a frequent concern with more basic, cheaper models.

Why is Melatonin so important?

Once the sun goes down and our surroundings are shrouded in increasing darkness, a tiny Pineal gland in our brain springs into action and releases melatonin into our blood.

The hormone functions as a signal that reminds us to head to bed and have a proper rest, thus maintaining our natural circadian rhythm, which demands us to be active during the day and relax when the night comes.

Regulating our sleeping schedule is melatonin‘s primary purpose – however, its work does not end there. It keeps our mood in check by protecting us from depression, anxiety and the effects of stress.

It lowers the risk of coronary disease, ensures proper functioning of the gallbladder and maintains the strength of the immune system.

Yet, shorctcuts like taking melatonin as a supplement for insomnia are only a short term solution and it comes with risks of its own, like the potential for a melatonin overdose.

Ways to go around fixing it naturally

Quick and convenient sleep supplements might seem tempting in such a predicament but they are not nearly as effective as natural ways to boost the Melatonin production.

There are two main elements that you need to look at and adjust accordingly in order to make your bodily clock run smoothly once again: light and food.

Adressing the issue of melatonin and blue light

Reduce your exposure to artificial light at least two hours before going to sleep. When it comes to the sources of artificial light, nothing disrupts your circadian rhythm as much as computer screens, TVs and mobile phones.

These are the primary sources of blue light that affect Melatonin production.

What you can do

Turn all of these devices off for the night, put them in a place which precludes the light from reaching you, or wear an eye mask. If pitch-black darkness makes you uncomfortable, use a candle instead.

You should also make sure to catch some natural sunlight during the day, as the pineal gland can only produce enough of the hormone during the night if it has remained completely inactive earlier on.

Tryptophan and melatonin

An essential amino acid called tryptophan is also important for those of you who are looking for natural ways to up your melatonin levels, as it facilitates the hormone’s production.

The highest amount of tryptophan can be found in foods like garbanzo beans, spirulina, cottage cheese, yoghurt, turkey, chicken, peanuts and pumpkin seeds.

What to avoid

When it comes to the products that you should avoid, coffee is, quite naturally, at the top of the list – it has been linked to significant drops in melatonin levels.

if you are having problems with kicking the coffeine addiction, you might consider substitutes like kava kava – you can see our guide on best kava kava supplements, extracts and powders for anxiety and sleep here.

Refrain from eating a large meal before bed or consuming sugary foods, as this can lead to blood sugar imbalances during the night and consequently disturb your natural sleeping patterns.

The top companies of the industry have spent plenty of time and money developing durable, comfortable products. Sure, you can still buy products that go flat during the night and that are only good for one or two uses. But if you want a quality product, you can now choose mattresses that have inner baffles and reinforced sides that won’t roll you out onto the tent floor. Here is our overview of some of the top manufacturers.

The companies we’ll list in this guide currently hold a majority of the the positions on our list of best air mattress reviews – you can see all the reviews listed here.

The parent company of SoundAsleep is Somnio LLC, and their design offices are in New Jersey. Their products have a limited 1-year manufacturer’s warranty. The company is also said to have excellent customer service, so if you have a problem with their product, you can talk to real people to have it fixed.

Their top modesl is currently the SoundAsleep Dream Series – see the full review of the air mattress here.

Since we have a separate page talking about the company in more detail – you can continue reading about SoundAsleep here.

They have also diversified with the sizes they’re making and are now among the top pick in twin blow-up mattresses ratings and comparisons which you can see here..

Who hasn’t heard of the Coleman company?

It was established 117 years ago when Oklahoma native William Coleman designed a pressurized gasoline lamp. These lamps were used to illuminate the first night time football game in the western U.S.

The company went on to develop camp stoves – including the first G.I. stove, sleeping bags, generators, tents, and backpacks.

In 1998, Sunbeam Corporation purchased the Coleman Company. Sunbeam declared bankruptcy in 2002 and re-branded as American Household, Inc., which was purchased by Newell Brands for $845 million.

The company continues to thrive, adding more products to the Coleman line every year. With facilities in Kansas and Texas and manufacturing overseas, they continue to provide reliable products for outdoorsmen.

Their top airbed models are:

• Coleman Cot airbed with side tables
• DoubleHigh Supportrest
• Coleman 4 in 1 Quickbed
• Coleman Quickbed SingleHigh

Insta-bed states that their goal is to provide their customers with the comfort of a permanent mattress in a portable product. Designed for use in either the guest room or campsite, the Insta-bed is constructed with their trademarked neverFLAT technology.

Their products are developed with the objective of delivering a comfortable night’s sleep even when you are away from home.

The Insta-bed models are usually lightweight, making it a good choice for campers who want to backpack into their campsite.

There are two components that make the beds with Insta neverFLAT technology better: the fabric and the pump.

The fabric for these mattresses is comprised of two layers. The inside layer is PVC, which increases the puncture resistance and makes the mattress air tight. The outer layer of fabric is durable polyester. This is the thicker layer, and provides a comfortable sleeping surface.

The fabric

The fabric also keeps sheets from slipping off of the mattress, and further increases the strength of the surface, making it fully puncture resistant. This double layer of fabric is used on the top and the bottom of the mattress. Since the exterior layer of polyester is so sturdy, the mattress uses less PVC. The interior of the mattress is supported with coils, which increases comfort and make the product more durable. The internal coils are said to be 80% stronger than the competition, making the mattress capable of supporting up to 700 pounds.

The pump

The neverFLAT pump is a dual pump design. This is a built-in system, so you don’t have to keep track of a separate pump. The primary pump quickly inflates and deflates the mattress, while the secondary pump quietly engages throughout the night to keep the mattress at your preset firmness. The technology is used in their most advanced-model – the Insta EZ.

The AeroBed brand of inflatables is designed to provide stylish, durable, and comfortable products for their customers. The company has been around since 1992, and has patented its pump technology.

In 2010, AeroBed became a registered trademark of the Coleman Company. This means you get the powerhouse customer service and history of quality products associated with Coleman.

• More recently, AeroBed has developed a range of raised models. This is the same comfortable and durable mattress they have always produced, but provides the elevation of a regular mattress. This makes it much easier to get into and out of the bed, and is quite popular with people who want a spare bed in the guest room without adding a piece of permanent furniture.

The New & Improved AeroBed models build further on the original design, providing mattresses that are firmer than their predecessors by 20%.

They can also inflate faster than the previous models – as if that was necessary – and containing the Whoosh valve for quick deflation. The pumps are now recessed so that even if you sit on the edge of the mattress, you will not feel any discomfort due to the pump. Previously, it was recommended that you keep the pump-end of the mattress at the foot of the bed.

Their top models:

• Opti-comfort queen air mattress with headboard
• Classic double high

Click here to see all top Aerobed mattresses – from Twin, Queen to Full-size

Intex Recreation Corp. makes airbeds, pools, and spas. They also manufacture and distribute outdoor furniture and boats, and have been around for over 40 years.

In the 70s, the company name was The Wet Set®, and their first inflatable item was a beach ball. They pioneered the science and design of above ground swimming pools, and, 20 years later, market spas.

Escaping the reputation of making “cheap” air beds

For decades, Intex has been followed by the aura of being at the lower end of the industry and catering to the needs of those looking for a cheap air bed.

That all changed with the introduction of the Durabeam Series and the FiberTech fibers.

These Dura-beams run horizontally across the inside of the mattress, providing support and retaining the shape of the product. This keeps it from sagging in the middle or breaking down along the edges. On the other hand – the fibers used to connect top to the bottom of the bed are made of high-tensile polyester fibers.

Their top model is Intex Comfort Plush Durabeam – it comes as a high and mid-rise.

Serta may be one of the most well-known names in the mattress industry. What many people don’t know, though, is that Serta makes inflatable beds, too. Their top models is Serta Raised Never Flat and the Serta EZ bed.

Achivements and awards

All of the design and manufacturing for Serta brand mattresses are done in the U.S. They are an award winning company, receiving the Women’s Choice Award for three years straight. Consumers Digest has listed the iComfortSleep System and the Perfect Sleeper® on their Best Buys. Serta also manufactures the Bellagio at Home line of mattresses.

Serta in hotels

Serta holds exclusive licenses with many leading providers of hospitality. Hilton Worldwide, Choice Hotels International, Marriott International, Best Western International, and Bellagio Las Vegas all contract specifically with Serta to provide high-quality, comfortable, and durable mattresses for their customers.

iComfort Sleep series

One of their most successful lines of mattresses has been the iComfort Sleep System. Introduced in 2011, this sleep system still set industry standards for comfort, affordability, and durability.

Since 2010, Serta has worked with the National Sleep Foundation to do a complete redesign of their Perfect Sleeper. The goal, originally, was to address five of the most common sleep problems. Work continues to develop even better sleep experiences for people, providing individualized sleep parameters. As a result of this collaboration, the National Sleep Foundation has named the Serta Perfect Sleeper as it’s only Official Mattress.